34500.00 $ New Hydmech H-10A, Automatic 10 X 10 Dual Post Horizontal Bandsaw Gordon

Published date: May 3, 2024
  • Location: Gordon, Texas, United States

New Hydmech H-10A, Automatic 10 X 10 Dual Post Horizontal Bandsaw


⭕ HYD-MECH HORIZONTAL BANDSAW

New 2012 Hyd-Mech Automatic Dual Post Horizontal Band Saw

Model H-10A

TECHNICAL SPECIFICATIONS (Description of Machine & Features is below)

Capacity:90º

Rectangular (h x w): 10 x 10

Round: 10

Square: 10

Blade Size: 1-¼ x 126
Blade Drive: 5 Hp
Blade Speed: 50-350 SFM
Band Wheel Diameter: 16
Hydraulic Drive: 1 Hp, 600 PSI
Hydraulic Tank Capacity: 4 US gal.
Coolant Tank Capacity: 15 US gal.
Shuttle Stroke: 0-24 Multi-Indexing
Machine Weight: 3,500 lbs.
Workload: 4,000 lbs.
Dimensions (w x l x h) 83 x 68 x 67
Table Height 31
Wired for 208V

Equipped with:

Variable Vise Pressure: Provides vise pressure adjustment, on both vises, when thin wall tubing and other light material are being cut. Minimizing application deformation potential.



Machine is In Stock. Under Power at our AZ Showroom. Been used as a Demo Machine for our AZ Showroom for the past year or so. Demos Available Upon Request. Available for Immediate Delivery

1 Year Parts & Labor Warranty Included (CA, AZ, NV Delivery Only)

Buyer is Responsible for Freight & Rigging

Price: $34,500.00
FOB: Phoenix, AZ 85040


MACHINE CONSTRUCTION & FEATURES

Machine Base The machine base is designed and produced with electro-welded steel components for maximum rigidity and support. Part of the main construction is a protective cover over the main cutting components, leaving only the vise area exposed. A chip removal auger, leveling bolts and 6.6 US gallon coolant tank are built into the base.

Model H-10A, Dual Post,
New VFD Motor Heavy Duty 5 Hp motor with a A/C inverter provides infinitely variable band speed allowing for efficient cutting of various applications.

H10Shuttle Feed

A roller in feed table and linear bearing mounted shuttle vise assembly provide high speed material indexing of up to 24 in a single movement with length accuracy of .005 per stroke. Driven by a Stepper Motor controlled Ball Screw assembly providing very quick and accurate cut lengths.Hyd-Mech Horizontal Band Saw, Automatic, Model H-10A, Dual Post, New

H10A Split Front Vise

Split Front Vise Provides material clamping on both sides of the blade and resulting in short material remnant length during automatic operation.
Blade Wheels High quality cast iron wheels with heavy-duty wheel & gearbox shaft bearings.
Guide Arms Heavy duty, cast iron guide arms. The idler side guide arm is mechanically connected to the front vise moveable jaw, moving in tandem with the opening and closing of the vise. This provides proper positioning of the guide arm spacing, in relation to material width, at all times.

Blade Guides Replaceable carbide insert guides housed in two heavy duty cast iron guide arms provide cut accuracy of + / - .002 per linear inch of material and excellent vibration dampening.
Powered Blade Brush Driven off the blade drive wheel the 3 blade brush keeps the blade gullets clean, helping to maximize blade performance and life.

Blade Tensioning

Manual Mechanical tensioning assembly allows for quick and simple blade changing. A LED display on the control console provides readout for proper tension setting.
Work Light A halogen work light provides substantial lighting over work piece / cutting area.
Coolant System A pump delivers ample coolant flow through carbide faced and nozzle guides. Flow valves are present for coolant quantity adjustment. A wash down hose with spray gun is also mounted on the machine.

H10A Hydraulic System

Hydraulic System A 3-position directional valve controls vises and head up/down. The hydraulic motor, pump, tank, and manifold are located in a conveniently accessed area.
Positive Down Feed System Provides easy adjustment of both head feed rate and cutting pressure. Feed rate readout is displayed on the machine PLC providing accurate adjustment and setup.
Electrical System The electrical control components are housed in an easy access cabinet in the back of the machine. Components and wiring are labeled for easy troubleshooting.

H10A Evocontroller

Control Panel User friendly and positioned at eye level on the front of the machine. The NC Controller controls the Automatic cycle and allows for Manual operation as well. Job information, such as part length and quantity, is entered through the interface keypad. Up to 999 different jobs can be entered into the PLC memory, and can be called up and performed at any time. Also, a JOB QUEUE function allows up to 100 jobs to be picked from the memory, and run consecutively.The automatic run sequence can be set so that the machine automatically pauses after the first cut between jobs in que in order to allow for a first off inspection prior to proceeding with the rest of the job. A wide variety of languages can be chosen for message screen display.
Manual mode Allows for a fast one cut operation. In this mode all functions are controlled and initialized by the operator. The display shows blade tension, blade speed, blade height position, feed rate, run time of the blade, run time of the cut and blade drive motor amperage draw.

Automatic mode The controller displays blade speed, blade tension part length, feed rate, quantity required, and piece count, job run time, total blade run time. The machine will shut down when the required number of pieces have been cut.

Blade Breakage Switch a function of the PLC software. If the blade breaks during operation the machine will be shut down.

Electrically Driven Chip Auger Built into the base, an auger screw pulls chips from the base and discharges at side of machine.

Blade Deviation Monitor - Monitors lateral blade deviation during cutting. If blade deflection increases beyond the pre-set warning limit, then the monitoring device sends a warning signal by means of a flashing beacon. If no steps are taken to correct this condition, the machine will continue to cut until the pre-set shut-down limit is reached. At this point the machine will behave in one of two ways, selectable by parameter setting:

Stop cutting, raise the head and shut down Or Finish the cut with present degree of deviation and then shut down.

Out of Stock Switch Mounted on the shuttle vise, when the vise closes with no material between its jaws, the machine hydraulics shut down (The cut in progress at the time will finish before shut down occurs). Allowing for the machine to be left unattended with no danger of the machine cycling with no material.


Phone number ✆ +1 469-345-1034

Gordon, Texas

Contact seller Share

Related listings

  • Craftsman 19.2 4 Piece Kit
    TOOLS - Lucas (Texas) - June 29, 2024 50.00 $

    Craftsman 19.2 4 Piece Kit ⭕ Have a 5 year old 4 piece kit. Skill saw, drill, VAC., and light. Use very little. Comes with one battery and charger. $50.00 call or text anytime. Phone number ✆ +1 361-226-4920 Lucas, Texas

  • Milwaukee Paint Sprayer
    TOOLS - Abbott (Texas) - June 27, 2024 395.00 $

    Milwaukee Paint Sprayer ⭕ Brand-new just out of the box, bought it last year at Home Depot to use it to paint my house. But I ended up hiring somebody to do it. sold for 849.00 New, asking $395. OBO. please reply with a phone number. Thanks Phone num...

  • Portable Air Compressor
    TOOLS - Van Horn (Texas) - June 27, 2024 125.00 $

    Portable Air Compressor ⭕ Portable air compressor 1 and 1/2 horsepower excellent condition works great Phone number ✆ +1 737-152-2102 Van Horn, Texas

  • Black And Decker (firestorm) 12 Volt Drill And Battery No Charger
    TOOLS - Kerrville (Texas) - June 27, 2024 5.00 $

    Black And Decker (firestorm) 12 Volt Drill And Battery No Charger ⭕ Black and decker 12 volt drill and battery but does not come with a charger as I broke the one that I had.......920 22 six 952 six Phone number ✆ +1 409-241-7441 Kerrville, Texas

  • Dewalt 4pcs Combo Kit - $80 FOR ALL!!!
    TOOLS - Marshall (Texas) - June 27, 2024 80.00 $

    Dewalt 4pcs Combo Kit - $80 FOR ALL!!! ⭕ Selling a Dewalt 4 piece combo kit. Everything works on all the pieces but the drill, its reverse is broken. Everything else works perfectly. Includes case, charger, and one battery. Phone number ✆ +1 737-288-...

  • GE 1 1/2 Hp Motor Single Phase
    TOOLS - Detroit (Texas) - June 26, 2024 50.00 $

    GE 1 1/2 Hp Motor Single Phase ⭕ General Electric Motor 1 1/2 hp. 1725 rpm 230 volts 7/8 shaft, 145 T frame. Fully tested and performed properly. Contact Kevin at Phone number ✆ +1 214-520-1647 Detroit, Texas

  • New 2016 Hydmech S20P, 13 X 18 Semi Automatic Scissor Style Band Saw
    TOOLS - Kountze (Texas) - June 25, 2024 15900.00 $

    New 2016 Hydmech S20P, 13 X 18 Semi Automatic Scissor Style Band Saw ⭕ New 2016 HydMech S-20P Series III, Semi Automatic Scissor Style Band Saw Machine Description: The S-20P, semi-automatic scissor style band saw features a swing head design and pro...

  • COLEMAN 425 LUMEN LED Lantern
    TOOLS - Converse (Texas) - June 25, 2024 1.00 $

    COLEMAN 425 LUMEN LED Lantern ⭕ BRAND NEW NEVER USED PRICE = $30 FIRM . I WONT ACCEPT LESS THAN$ 30 USES 3 D cell batteries ( NOT INCLUDED) Approximately 6 inches tall NO TRADES, SHIPPING or MEETUPS outside St. Andrews road area in Columbia SC CALL W...

  • Western Snow Plow Like New!!!!
    TOOLS - Kingwood (Texas) - June 25, 2024 2500.00 $

    Western Snow Plow Like New!!!! ⭕ We snow polly snow plow complete like new Quick release 2011 chevy 3/4 ton brackets Complete wiring with remote Always stored inside Like new condition!!! $2500 Phone number ✆ +1 210-500-1929 Kingwood, Texas

  • Zircon StudSensor HD70 Stud Finder
    TOOLS - Archer City (Texas) - June 24, 2024 20.00 $

    Zircon StudSensor HD70 Stud Finder ⭕ Like new if interested please text me at thank you. The StudSensor HD70 center finding stud finder boasts more design innovations by Zircon. Featuring an enhanced bright, backlit LCD display, it debuts a new Targe...

  • Anderson Drill Press Jig
    TOOLS - Cameron (Texas) - June 24, 2024 75.00 $

    Anderson Drill Press Jig ⭕ Anderson Machining & Drilling Jig - never used. Includes Jig, Screws, Shims and Drilling bits. Phone number ✆ +1 325-262-1356 Cameron, Texas

  • Radial Arm Saw
    TOOLS - Jacksonville (Texas) - June 24, 2024 125.00 $

    Radial Arm Saw ⭕ for sale radial arm saw. works great. black&decker dewalt . Phone number ✆ +1 430-690-9591 Jacksonville, Texas

  • Kipex Retaining Ring Plier
    TOOLS - Pecos (Texas) - June 23, 2024 30.00 $

    Kipex Retaining Ring Plier ⭕ Kipex Retaining Ring Plier 4413J3 40-100mm Phone number ✆ +1 903-435-3699 Pecos, Texas

  • Car Lift NEW 9000 Lb Capacity 2 Post Service Lift
    TOOLS - Woodville (Texas) - June 23, 2024 1695.00 $

    Car Lift NEW 9000 Lb Capacity 2 Post Service Lift ⭕ We are certified lift installers, covered by workers comp and insured. We install over 100 lifts per year. www.toolsplususa.com Tools Plus, 3245 Piqua Troy Road, Troy, Ohio 45373 Call mon-fri 10am-6...

  • Porter Cable Brad Nailer
    TOOLS - Fulshear (Texas) - June 23, 2024 40.00 $

    Porter Cable Brad Nailer ⭕ Porter Cable Brad nailer, used in good condition. Cleaning out a duplicate of another tool I dont need. Thanks for looking. Phone number ✆ +1 817-254-4931 Fulshear, Texas

Comments

    Leave your comment (spam and offensive messages will be removed)