1.00 $ Mig & Flux Core Welder Gas & Fluxcore Paynesville

Published date: June 5, 2024
  • Location: Paynesville, Minnesota, United States

Mig & Flux Core Welder Gas & Fluxcore


⭕ Sorry but we can only accept emails & calls and DO NOT communicate through texting. If no answer, please leave a message and will call you back asap :o)

This is a Campbell Hausfeld Farmhand 125 Mig & Flux core Welder

Bought this brand new and well taken care of.

Welder has done a nice job for me but have been wanting to upgrade for the last couple years to a welder that has the highest amp output for being used on a 115v circuit and so I just now got the Hobart Handler 140 mig

This Farmhand welder has 4 heat/amp settings allowing to weld up to 1/4 thick steel and Ive even welded up to 1/2 thick steel and just having to make a couple passes to build up the weld.

This model comes with the spool adapter so it can use either the 2lb or the 10lb spool of wire

The drive wheel is still in good condition and can be flipped to let you use either the .024, .030. or the .035 wire

Comes with extra tips for .030 and .035 .....probably 5 of each tip.

May come with the argon/co2 gauges and hose which are Hobart gauges which alone cost 90.00 , but the argon/co2 tank will not come with the welder.

If I sell the gauges with the welder, 170.00 will be a firm price. If the gauges dont come with the welder, I will negotiate with reasonable offers.

Located between Steubenville 43952 and Toronto 43964 Ohio off of state route 213

Seven4Zero 3Four6 Six0Four9


Phone number ✆ +1 763-514-4796

Paynesville, Minnesota

Contact seller Share

Related listings

  • NEW Air Hammer/chisel, W/ Attachments
    TOOLS - Dundas (Minnesota) - July 4, 2024 10.00 $

    NEW Air Hammer/chisel, W/ Attachments ⭕ Selling a NEW air hammer/chisel, with the attachments. Central Pneumatic brand. AS IS. $10. CASH. Pickup in Woodville, Al. Phone number ✆ +1 763-309-6237 Dundas, Minnesota

  • 9 In Ryobi Band Saw
    TOOLS - Steen (Minnesota) - July 3, 2024 80.00 $

    9 In Ryobi Band Saw ⭕ this saw is in exc- condition with a extension table 11 3/4 x 14 3/4 in - with a 3.000 fpm speed.it also comes with a operators manual. Phone number ✆ +1 320-643-4338 Steen, Minnesota

  • Like New 2 HP Pancake Compressor 8.82 CFM Oil Lube
    TOOLS - Kent (Minnesota) - July 2, 2024 175.00 $

    Like New 2 HP Pancake Compressor 8.82 CFM Oil Lube ⭕ This 2 Horsepower 3 or 4 gallon 8.82 CFM Red Pancake Tank Commercial Duty High Performance Compressor with top handle is an older unit (early 90s) was in dry storage and has seen only a couple of r...

  • ELECTRIC DRILL
    TOOLS - Halma (Minnesota) - July 2, 2024 10.00 $

    ELECTRIC DRILL ⭕ Old electric drill in working order. reversible 3/8 chuck. $10. Phone number ✆ +1 651-214-4564 Halma, Minnesota

  • NAILERS- 2 Framing Nailers By Paslode
    TOOLS - New Hope (Minnesota) - July 2, 2024 60.00 $

    NAILERS- 2 Framing Nailers By Paslode ⭕ $60 each or $100 for both. No charger. Best to call by phone. Phone number ✆ +1 763-317-2245 New Hope, Minnesota

  • CEN-TECH POWER INVERTER 2000 WATT 4000 WATT PEAK
    TOOLS - Kasota (Minnesota) - July 1, 2024 120.00 $

    CEN-TECH POWER INVERTER 2000 WATT 4000 WATT PEAK ⭕ CEN-TECH POWER INVERTER 2000 WATT 4000 WATT PEAK USED AND GOOD CONDITION $120.00 NO COUPON AS IS, NO RETURNS, NO EXCHANGE, NO EXCEPTION Phone number ✆ +1 763-295-3249 Kasota, Minnesota

  • Bostitch 23 Ga. Pinner And Hose
    TOOLS - Kenneth (Minnesota) - July 1, 2024 100.00 $

    Bostitch 23 Ga. Pinner And Hose ⭕ Like new in box Bostitch 23 ga. Pinner and hose. Model #hp118k NEED TO GO...MAKE AN OFFER! Phone number ✆ +1 612-629-9949 Kenneth, Minnesota

  • Propane Forklift - Stand Up Dockstocker - Walkie Stacker
    TOOLS - Miltona (Minnesota) - July 1, 2024 6995.00 $

    Propane Forklift - Stand Up Dockstocker - Walkie Stacker ⭕ We have over 400 quality forklifts in stock. *Propane Forklifts *Stand up Dockstockers *Manlifts *Walkie Stackers *Electric Pallet Jacks *Stock Pickers *Batteries have been load tested and re...

  • 3 SHELF ROLLING CART - HEAVY DUTY
    TOOLS - Plymouth (Minnesota) - July 1, 2024 75.00 $

    3 SHELF ROLLING CART - HEAVY DUTY ⭕ LARGE ROLLING CART, 3 SHELVES This is a large heavy duty cart made with heavy guage steel. It has wheels for easy maneuvering. Dimensions - 28x24x54 PRICE IS $75.00 CASH ONLY! We do not Deliver or Ship. I DO NOT RE...

  • Three Hand Saws
    TOOLS - New Market (Minnesota) - July 1, 2024 5.00 $

    Three Hand Saws ⭕ Had saws for sale come get them. $5.00 each Phone number ✆ +1 763-317-4947 New Market, Minnesota

  • Rechargable Lawnmower 12V Cordless HUSQVARNA
    TOOLS - Iona (Minnesota) - July 1, 2024 60.00 $

    Rechargable Lawnmower 12V Cordless HUSQVARNA ⭕ 12V cordless HUSQVARNA rechargeable lawnmower includes transformer for charging , manual, needs a new battery - see manual - good brand , sold As-Is $60 OBO, cash Text is preferred contact method, no cal...

  • Craftsman 18 Chainsaw
    TOOLS - New Germany (Minnesota) - June 30, 2024 1.00 $

    Craftsman 18 Chainsaw ⭕ good condition $125 Phone number ✆ +1 763-161-5599 New Germany, Minnesota

  • **Bosch 11244E Hammer Drill**
    TOOLS - Miesville (Minnesota) - June 30, 2024 250.00 $

    **Bosch 11244E Hammer Drill** ⭕ Bosch 11244E Hammer Drill. Includes 2 bits and case. Good Shape!! $250. Call (406)eight92three915 Phone number ✆ +1 763-378-6381 Miesville, Minnesota

  • Gas Powered Air Compressor
    TOOLS - Blomkest (Minnesota) - June 30, 2024 800.00 $

    Gas Powered Air Compressor ⭕ gas powered air compressor Phone number ✆ +1 651-426-7830 Blomkest, Minnesota

  • New Titan 8 Gal Gas Air Compressor
    TOOLS - Kelliher (Minnesota) - June 30, 2024 450.00 $

    New Titan 8 Gal Gas Air Compressor ⭕ New Titan 8 gallon gas air compressor. Phone number ✆ +1 763-543-3487 Kelliher, Minnesota

Comments

    Leave your comment (spam and offensive messages will be removed)